EFS-2500

Another Adhesive Removal

After 10 minutes the EFS-2500 was still as wet as when I applied it, and I couldn't tell if it had lifted the adhesive. I started scraping with the plastic body spreader anyway. Low and behold, the adhesive came right off except for one very tiny spot that I scrubbed free with the toothbrush I used to apply the stripper. Again, I used the bottle brush to remove the adhesive from the bolt holes. How did it compare to the chemical gasket removers that I've used in the past? Considerably better. It usually requires several messy and smelly applications of the gasket remover (by spray can) before the gasket and adhesive finally cleans off completely.

Adhesive Removal Image Gallery | Image 5 of 5

U.S. Military Name Tapes Link