Ryobi 18V One+ Power Inflator
Cobalt SS/SC Driver Front Tire
The driver side front tire was down 2 psi, so I attached the Ryobi 18V One+ Power Inflator — the gauge on the Inflator read 38 psi, which was 6 psi higher than my old parts store tire gauge. I pressed the trigger and in about 22 seconds it reached 42 psi on the gauge and I had to quickly pop the air chuck off the valve stem before it lost too much pressure. I then went about adjusting the pressure with the release button on my parts store tire gauge. It was only about a half a PSI too high because I was slow to get the chuck off — I needed to be careful not to break the plastic lever. FYI, the instructions that come with the Power Inflator state a 5-minute continuous use to 5-minute rest ratio. Different from the 10-minute to 10-minute ratio for the Ryobi 18V One+ Dual Function Inflator/Deflator previously tested. Photo: Ryan King, 2019.
Assembly and Use Image Gallery | Image 8 of 11