HomeTechnicalMAF Connector ReplacementStep 5

MAF Connector Replacement

Step 5

Clean all the parts you will be using during the installation of the connector. In this case I cleaned the connector, both seals, and the red retainer. I used GreaseMaster at 2:1, but if you have anything other than grease, like a sticker or marking, use Super Clean Plastic Cleaner to get it off, it should (but isn't guaranteed) do so without hurting the connector. TIP: Be careful about cleaning the rubber parts with Super Clean, it might damage them. Photo: Ryan King, 2008.

Replacement Procedure Image Gallery | Image 6 of 15

U.S. Military Name Tapes Link